The Inkmaker "P Series” are automatic dispensing systems, conceptualised to offer solutions for users with moderate to high output requirements.
Thanks to their patented centre point dispensing, they can dispense into containers of any size.
Fully automatic and easy to operate, they require minimal input. The operator can produce the required formulas in few simple steps and with perfect accuracy.
The number of valves mounted on each equipment will be based on the actual customer’s requirements. Valves are individually activated through a pneumatic cylinder, without rotating mechanical parts or motors, making the system easy to operate.
The systems can handle both water based as well as solvent-based products (ATEX or IEC-EX - version). The systems are operated though a computer using Inkmaker software. Scale tare is automatically set by the computer. A weigh summary sheet is printed for each batch showing the exact batch information.
The user can display or print several reports, including: dispensed formulas, job costing, production history, stock availability, etc. Production traceability is simplified with the use of a bar-code system c/w bar-code reader and bar-code label printer. Pneumatic pumps deliver the base components to the dispensing head.
Components can be stocked in 200 L drums or in other type of containers of different size and capacity. Systems are configured according to the available space and for the required production volumes.
|Components||P32 > Up to 32 (DN18/DN28)
P48 > Up to 48 (DN32) or 24 (DN50)
P72 > Up to 72 (DN32) or 36 (DN50)
P96 > Up to 96 (DN32) or 48 (DN50)
|Dipensing valves’ size||DN18 – DN28 - DN32 – DN50|
|Dispensing Acuracy||1 g (0.1 g upon request)|
|Average Dispensing Time
*based on a formula with 4 components
|3 - 5 min for a 5 Kg batch
@ 0.1 g accuracy (EG: for Pre-QC operations)
3 min for a 20 Kg batch
12 - 15 min for a 200 Kg batch
15 - 20 min for a 500 Kg batch
25 - 30 min for a 1000 Kg batch